Wide-Turn Truck Accidents in Gainesville

Speedni

Many of us start to feel nervous when we are driving in close proximity to large trucks ─ and for good reason. Due to their immense size and weight, commercial trucks can inflict catastrophic injuries and cause significant damage in accidents with smaller vehicles. Moreover, trucks’ dimensions make them difficult to maneuver, increasing the likelihood that they will cause specific types of accidents. This is the case with wide-turn truck accidents.

If you have been hit by a truck making a wide turn, it is important to promptly seek legal advice. You should not have to take on a financial burden for an accident that was not your fault. A wide-turn truck accident attorney at Fine, Farkash & Parlapiano, P.A., can help you demand full compensation for your losses. Call us today to schedule a free consultation about your case.

Why Are Trucks Forced into Wide Turns?

Wide turns are risky, so it can be frustrating to see trucks make them in busy intersections. However, these turns are sometimes unavoidable. In many instances, truck drivers’ only option is to make a wide turn.

Due to their large size, commercial trucks have a much wider turning radius than passenger vehicles. Unfortunately, not all intersections are big enough to accommodate this radius. Oftentimes, truck drivers need more space than their lane offers to execute a turn. This is why a truck may swing left (away from the curb) before making a right turn, or may veer briefly into the oncoming traffic lane after turning.

Still, truck drivers should be able to make consistently safe turns, even when they are wide. Even if a driver is forced into a wide turn, there are certain precautions that the driver can take to minimize risk to other cars. These precautions include checking carefully for surrounding and oncoming traffic, as well as using clear turn signals. Furthermore, truck drivers receive ─ or, at least, are supposed to receive ─ training on how to execute safe wide turns. Therefore, although wide turns are a reality of being a truck driver, so is the responsibility to execute them safely and conscientiously.

Who Is to Blame for a Wide-Turn Truck Accident?

When any kind of crash happens, it is important for those involved to learn who is at fault. Like other types of accidents, where the blame falls can vary. In many cases, the driver of one of the vehicles may be found at fault. This might be the case if the driver was distracted, ran a traffic light, did not properly signal, or was otherwise acting negligently at the time of the accident.

Generally speaking, ordinary drivers should not have to account for other vehicles making wide turns. Instead, truck drivers have a responsibility to ensure the safety of a wide turn in almost any given scenario. For example, a truck driver who is going to briefly enter the oncoming traffic lane after a turn should make sure that there are no cars in that lane first. When a trucker fails to take such actions and an accident results, these drivers may be held liable.

However, it is also possible that a trucking company may be found at fault for this type of accident. If a driver has never received training on executing safe turns and subsequently causes an accident, then the trucking company may be held responsible for poor training and supervision.

Pursuing Compensation for a Trucking Wide-Turn Collision

If you have suffered an injury as a result of a wide-turn truck collision, you may be eligible for compensation. Depending on the circumstances of your case, you may be entitled to compensation for:

  • Medical bills
  • Future care needs
  • Lost wages
  • Loss of earning capacity
  • Pain and suffering damages

To pursue this compensation, you will most likely need to face off against a powerful trucking company and insurers. These companies are accustomed to dealing with the fallout of accidents, and often they have their own team of lawyers to protect their financial interests.

Our skilled truck accident attorneys at Fine, Farkash & Parlapiano, P.A., can help you challenge a large, well-resourced company to fight for the full recovery you deserve. Our respected team will put our in-depth knowledge of complex trucking rules and regulations to good use. We will gather extensive evidence to build your case and negotiate assertively for the full compensation you need to heal. If a fair settlement cannot be reached, we will be ready to take your case to trial to demand justice for you.

What to Do If You Were Hurt in a Wide-Turn Truck Accident

If you have been hurt in a wide-turn truck accident, there are crucial steps you can take to protect yourself and your interests.

  • First, stop your car and report the crash to the authorities.
  • Collect relevant information from the truck driver, such as the driver’s contact information, insurance information, license and registration information, and the name of the trucking company.
  • Also collect the contact information of any witnesses present.
  • If you are physically able, do your best to document the accident with photos.
  • Immediately seek medical assistance, and follow the doctor’s orders.
  • Then, do not hesitate to contact a wide-turn truck accident attorney. It is important to contact a lawyer sooner rather than later. This way, your lawyer can gather all relevant evidence before it is disposed of or lost.

How Our Lawyers Can Help You After a Wide-Turn Truck Accident in Gainesville

If you are struggling in the aftermath of a wide-turn truck accident, an attorney at Fine, Farkash & Parlapiano, P.A., can help take the pressure off you. Since 1980, our seasoned attorneys have been standing strong for Gainesville residents who have been hurt in serious truck accidents. We are a small, tight-knit firm and pride ourselves on taking an approach that centers on each client’s specific needs.

To schedule your free, confidential consultation with a skilled truck accident attorney, contact us today. There are no upfront fees, and you only pay us if we win compensation for you.